Netty3源码学习-LengthFieldBasedFrameDecoder_JAVA_编程开发_程序员俱乐部

中国优秀的程序员网站程序员频道CXYCLUB技术地图
热搜:
更多>>
 
您所在的位置: 程序员俱乐部 > 编程开发 > JAVA > Netty3源码学习-LengthFieldBasedFrameDecoder

Netty3源码学习-LengthFieldBasedFrameDecoder

 2013/12/5 18:26:15  bylijinnan  程序员俱乐部  我要评论(0)
  • 摘要:先看看LengthFieldBasedFrameDecoder的官方APIhttp://docs.jboss.org/netty/3.1/api/org/jboss/netty/handler/codec/frame/LengthFieldBasedFrameDecoder.htmlAPI举例说明了LengthFieldBasedFrameDecoder的解析机制,如下:实际消息内容是“HELLO,WORLD”,长度是12bytes(注意逗号后面有一个空格
  • 标签:学习 源码 net DBA ASE
先看看LengthFieldBasedFrameDecoder的官方API
http://docs.jboss.org/netty/3.1/api/org/jboss/netty/handler/codec/frame/LengthFieldBasedFrameDecoder.html

API举例说明了LengthFieldBasedFrameDecoder的解析机制,如下:

实际消息内容是“HELLO, WORLD”,长度是12 bytes(注意逗号后面有一个空格)

实例1
lengthFieldLength   = 2表示“Length”的长度,而“Length”的值
就是“Actual Content”的长度(0x000C, 也就是12):
class="java">
lengthFieldOffset   = 0
lengthFieldLength   = 2
lengthAdjustment    = 0
initialBytesToStrip = 0 (= do not strip header)

BEFORE DECODE (14 bytes)         AFTER DECODE (14 bytes)
+--------+----------------+      +--------+----------------+
| Length | Actual Content |----->| Length | Actual Content |
| 0x000C | "HELLO, WORLD" |      | 0x000C | "HELLO, WORLD" |
+--------+----------------+      +--------+----------------+


实例2
initialBytesToStrip = 2 表示在decode时,要去掉多少个字节
在这个例子,表示要去掉“Length”(2个字节)
可以看到,AFTER DECODE后,“Length”没有了,只剩下“Actual Content”:
lengthFieldOffset   = 0
lengthFieldLength   = 2
lengthAdjustment    = 0
initialBytesToStrip = 2 (= the length of the Length field)

BEFORE DECODE (14 bytes)         AFTER DECODE (12 bytes)
+--------+----------------+      +----------------+
| Length | Actual Content |----->| Actual Content |
| 0x000C | "HELLO, WORLD" |      | "HELLO, WORLD" |
+--------+----------------+      +----------------+


实例3
与实例1不同,这里“Length”的值不是“Actual Content”的长度,而是
整个消息的长度(0x000E,14  = 2  + 12)。用lengthAdjustment=-2来表示
“Actual Content”的长度要减2:
wholeLength = valueOf(Length) = 14
actualContentLength = wholeLength + lengthAdjustment = 14 + (-2)=12
lengthFieldOffset   =  0
lengthFieldLength   =  2
lengthAdjustment    = -2 (= the length of the Length field)
initialBytesToStrip =  0

BEFORE DECODE (14 bytes)         AFTER DECODE (14 bytes)
+--------+----------------+      +--------+----------------+
| Length | Actual Content |----->| Length | Actual Content |
| 0x000E | "HELLO, WORLD" |      | 0x000E | "HELLO, WORLD" |
+--------+----------------+      +--------+----------------+


实例4
这个例子多了一个“Header 1”(oxCAFE,长度为2 )
用 lengthFieldOffset   = 2表示“Length”从第3个字节开始
“Length”的值仍然是“Actual Content ”的长度,不过“Length”自身的
长度是3 (值是0x00000C,而不是上面的0x000C)
lengthFieldOffset   = 2 (= the length of Header 1)
lengthFieldLength   = 3
lengthAdjustment    = 0
initialBytesToStrip = 0

BEFORE DECODE (17 bytes)                      AFTER DECODE (17 bytes)
+----------+----------+----------------+      +----------+----------+----------------+
| Header 1 |  Length  | Actual Content |----->| Header 1 |  Length  | Actual Content |
|  0xCAFE  | 0x00000C | "HELLO, WORLD" |      |  0xCAFE  | 0x00000C | "HELLO, WORLD" |
+----------+----------+----------------+      +----------+----------+----------------+


实例5
与实例4不同的地方是,“Length”和“Header 1”的位置调换了
wholeLength = valueOf(Length) = 14
actualContentLength = wholeLength + lengthAdjustment = 14 + 2=16
因此在decode时,会认为“Header 1”也是“Actual Content”的一部分
lengthFieldOffset   = 0
lengthFieldLength   = 3
lengthAdjustment    = 2 (= the length of Header 1)
initialBytesToStrip = 0

BEFORE DECODE (17 bytes)                      AFTER DECODE (17 bytes)
+----------+----------+----------------+      +----------+----------+----------------+
|  Length  | Header 1 | Actual Content |----->|  Length  | Header 1 | Actual Content |
| 0x00000C |  0xCAFE  | "HELLO, WORLD" |      | 0x00000C |  0xCAFE  | "HELLO, WORLD" |
+----------+----------+----------------+      +----------+----------+----------------+


实例6
看起来要比之前的例子复杂一些,但其实是上面例子的组合
lengthFieldOffset = 1表示“Length”从第2个字节开始
lengthFieldLength   = 2表示“Length”的长度是2
lengthAdjustment    = 1表示“HDR2”的长度是1:
wholeLength = valueOf(Length) = 0x000C = 12
actualContentLength = wholeLength + lengthAdjustment = 12 + 1=13
decode时,会认为“Length”后面的13个字节都是“Actual Content”,
因此会认为“HDR2”也是“Actual Content”的一部分
initialBytesToStrip = 3 表示decode时,去掉3个字节
lengthFieldOffset   = 1 (= the length of HDR1)
lengthFieldLength   = 2
lengthAdjustment    = 1 (= the length of HDR2)
initialBytesToStrip = 3 (= the length of HDR1 + LEN)

BEFORE DECODE (16 bytes)                       AFTER DECODE (13 bytes)
+------+--------+------+----------------+      +------+----------------+
| HDR1 | Length | HDR2 | Actual Content |----->| HDR2 | Actual Content |
| 0xCA | 0x000C | 0xFE | "HELLO, WORLD" |      | 0xFE | "HELLO, WORLD" |
+------+--------+------+----------------+      +------+----------------+

实例7
与实例6不同的是,lengthAdjustment = -3,是负数
因此,
wholeLength = valueOf(Length) = 0x0010 = 16
actualContentLength = wholeLength + lengthAdjustment = 16 + (-3)=13
decode时,会认为“Length”后面的13个字节都是“Actual Content”,
最终效果与实例6一样
lengthFieldOffset   =  1
lengthFieldLength   =  2
lengthAdjustment    = -3 (= the length of HDR1 + LEN, negative)
initialBytesToStrip =  3

BEFORE DECODE (16 bytes)                       AFTER DECODE (13 bytes)
+------+--------+------+----------------+      +------+----------------+
| HDR1 | Length | HDR2 | Actual Content |----->| HDR2 | Actual Content |
| 0xCA | 0x0010 | 0xFE | "HELLO, WORLD" |      | 0xFE | "HELLO, WORLD" |
+------+--------+------+----------------+      +------+----------------+


API看完,我们来看看源码(只保留关键代码):
public class LengthFieldBasedFrameDecoder extends FrameDecoder {

    private final int maxFrameLength;	//超出此长度的Frame将被丢弃
    private final int lengthFieldOffset;
    private final int lengthFieldLength;
    private final int lengthFieldEndOffset;		//这个值等于lengthFieldOffset + lengthFieldLength
    private final int lengthAdjustment;
    private final int initialBytesToStrip;
	
	protected Object decode(
            ChannelHandlerContext ctx, Channel channel, ChannelBuffer buffer) throws Exception {
			
		//数据未完整,先不处理
        if (buffer.readableBytes() < lengthFieldEndOffset) {
            return null;
        }
		
		/*
		先读取“Length”的值
		在LengthFieldBasedFrameDecoder的构造函数中,限定了“Length”的长度:
		“lengthFieldLength must be either 1, 2, 3, 4, or 8”
		单位是bytes。这个限定不知从何而来,先不管
		由于接收到的数据的类型是ChannelBuffer,也就是byte[],那么在读取时,
		就应该根据长度来分割数据
		例如,lengthFieldLength=3,说明读取前3个字节就得到“Length”的值
		读取时,用到了位操作,ByteOrder是BIG_ENDIAN,因此高位在前,要左移位:
		public int getUnsignedMedium(int index) {
			return  (array[index]     & 0xff) << 16 |
					(array[index + 1] & 0xff) <<  8 |
					(array[index + 2] & 0xff) <<  0;
		}
		注意到,这个方法不会改变readerIndex
		下面代码的frameLength,其实就是上面API分析时提到的valueOf(Length)
		*/
        int actualLengthFieldOffset = buffer.readerIndex() + lengthFieldOffset;
        long frameLength;
        switch (lengthFieldLength) {
        case 1:
            frameLength = buffer.getUnsignedByte(actualLengthFieldOffset);
            break;
        case 2:
            frameLength = buffer.getUnsignedShort(actualLengthFieldOffset);
            break;
        case 3:
            frameLength = buffer.getUnsignedMedium(actualLengthFieldOffset);
            break;
        case 4:
            frameLength = buffer.getUnsignedInt(actualLengthFieldOffset);
            break;
        case 8:
            frameLength = buffer.getLong(actualLengthFieldOffset);
            break;
        default:
            throw new Error("should not reach here");
        }

		//如分析API时所说,要加上lengthAdjustment
		//那为什么 还要加上lengthFieldEndOffset?
		//加上之后,frameLength就代表整个frame的长度了,包括前缀和“Actual Content”
        frameLength += lengthAdjustment + lengthFieldEndOffset;

        int frameLengthInt = (int) frameLength;
		
		//数据未完整,先不处理
        if (buffer.readableBytes() < frameLengthInt) {
            return null;
        }

		//readerIndex往后移,跳过指定的字节,不读取
        buffer.skipBytes(initialBytesToStrip);

        // extract frame ,读取消息的内容
        int readerIndex = buffer.readerIndex();
        int actualFrameLength = frameLengthInt - initialBytesToStrip;
        ChannelBuffer frame = extractFrame(buffer, readerIndex, actualFrameLength);
		
		//extractFrame方法不改变buffer的readerIndex,因此要手动设置
        buffer.readerIndex(readerIndex + actualFrameLength);
        return frame;
    }
	
	//这个方法创建了新的ChannelBuffer,不影响原buffer
	protected ChannelBuffer extractFrame(ChannelBuffer buffer, int index, int length) {
        ChannelBuffer frame = buffer.factory().getBuffer(length);
        frame.writeBytes(buffer, index, length);
        return frame;
    }
}
	
 
 
 
发表评论
用户名: 匿名