最佳字符串匹配算法(Damerau-Levenshtein距离算法)的Java实现_JAVA_编程开发_程序员俱乐部

中国优秀的程序员网站程序员频道CXYCLUB技术地图
热搜:
更多>>
 
您所在的位置: 程序员俱乐部 > 编程开发 > JAVA > 最佳字符串匹配算法(Damerau-Levenshtein距离算法)的Java实现

最佳字符串匹配算法(Damerau-Levenshtein距离算法)的Java实现

 2013/11/11 12:39:32  datamachine  程序员俱乐部  我要评论(0)
  • 摘要:原文:http://www.javacodegeeks.com/2013/11/java-implementation-of-optimal-string-alignment.html---------------------------------------------------------------------------------------------------------------------------------Forawhile
  • 标签:实现 Java 字符串 算法

原文:http://www.javacodegeeks.com/2013/11/java-implementation-of-optimal-string-alignment.html
---------------------------------------------------------------------------------------------------------------------------------

For a while, I’ve used the Apache Commons lang StringUtils implementation ofLevenshtein distance. ?It implements a few well known tricks to use less memory by only hanging on to two arrays instead of allocating a huge n x m table for the memoisation table. ?It also only checks a “stripe” of width 2 * k?+1 where k is the maximum number of edits.

?

In most practical usages of levenshtein you just care if a string is within some small number (1, 2, 3) of edits from another string. ?This avoid much of the n * m computation that makes levenstein “expensive”. ?We found that with a k <= 3, levenshtein with these tricks was faster than?Jaro-Winkler distance, which is an approximate edit distance calculation that was created to be a faster approximate (well there were many reasons).

?

Unfortunately, the Apache Commons Lang implementation only calculates Levenshtein and not the possible more useful?Damerau-Levenshtein distance. ?Levenshtein defines the edit operations insert, delete, and substitute. ?The Damerau variant adds *transposition* to the list, which is pretty useful for most of the places I use edit distance. ?Unfortunately DL distance is not a true metric in that it doesn’t respect the triangle inequality, but there are plenty of applications that are unaffected by this. ?As you can see from that wikipedia page, there is often confusion between Optimal String Alignment and DL distance. ?In practice OSA is a simpler algorithm and requires less book-keeping so the runtime is probably marginally faster.

?

I could not find any implementations of OSA or DL that used the memory tricks and “stripe” tricks that I saw in Apache Commons Lang. ?So I implemented my own OSA using those tricks. ?At some point I’ll also implement DL with the tricks and see what the performance differences are:

?

Here’s OSA in Java. ?It’s public domain; feel free to use as you like. The unit tests are below. Only dependency is on Guava- but its just the preconditions class and an annotation for documentation so easy to remove that dependency if you like:

?

package com.github.steveash.util;

import static com.google.common.base.Preconditions.checkArgument;
import static com.google.common.base.Preconditions.checkNotNull;
import static com.google.common.primitives.Shorts.checkedCast;
import static java.lang.Math.abs;
import static java.lang.Math.max;

import java.util.Arrays;

import com.google.common.annotations.VisibleForTesting;

/**
 * Implementation of the OSA which is similar to the Damerau-Levenshtein in that it allows for transpositions to
 * count as a single edit distance, but is not a true metric and can over-estimate the cost because it disallows
 * substrings to edited more than once.  See wikipedia for more discussion on OSA vs DL
 * <p/>
 * See Algorithms on Strings, Trees and Sequences by Dan Gusfield for more information.
 * <p/>
 * This also has a set of local buffer implementations to avoid allocating new buffers each time, which might be
 * a premature optimization
 * <p/>
 * @author Steve Ash
 */
public class OptimalStringAlignment {

    private static final int threadLocalBufferSize = 64;

    private static final ThreadLocal<short[]> costLocal = new ThreadLocal<short[]>() {
        @Override
        protected short[] initialValue() {
            return new short[threadLocalBufferSize];
        }
    };

    private static final ThreadLocal<short[]> back1Local = new ThreadLocal<short[]>() {
        @Override
        protected short[] initialValue() {
            return new short[threadLocalBufferSize];
        }
    };

    private static final ThreadLocal<short[]> back2Local = new ThreadLocal<short[]>() {
        @Override
        protected short[] initialValue() {
            return new short[threadLocalBufferSize];
        }
    };

    public static int editDistance(CharSequence s, CharSequence t, int threshold) {
        checkNotNull(s, "cannot measure null strings");
        checkNotNull(t, "cannot measure null strings");
        checkArgument(threshold >= 0, "Threshold must not be negative");
        checkArgument(s.length() < Short.MAX_VALUE, "Cannot take edit distance of strings longer than 32k chars");
        checkArgument(t.length() < Short.MAX_VALUE, "Cannot take edit distance of strings longer than 32k chars");

        if (s.length() + 1 > threadLocalBufferSize || t.length() + 1 > threadLocalBufferSize)
            return editDistanceWithNewBuffers(s, t, checkedCast(threshold));

        short[] cost = costLocal.get();
        short[] back1 = back1Local.get();
        short[] back2 = back2Local.get();
        return editDistanceWithBuffers(s, t, checkedCast(threshold), back2, back1, cost);
    }

    @VisibleForTesting
    static int editDistanceWithNewBuffers(CharSequence s, CharSequence t, short threshold) {
        int slen = s.length();
        short[] back1 = new short[slen + 1];    // "up 1" row in table
        short[] back2 = new short[slen + 1];    // "up 2" row in table
        short[] cost = new short[slen + 1];     // "current cost"

        return editDistanceWithBuffers(s, t, threshold, back2, back1, cost);
    }

    private static int editDistanceWithBuffers(CharSequence s, CharSequence t, short threshold,
            short[] back2, short[] back1, short[] cost) {

        short slen = (short) s.length();
        short tlen = (short) t.length();

        // if one string is empty, the edit distance is necessarily the length of the other
        if (slen == 0) {
            return tlen <= threshold ? tlen : -1;
        } else if (tlen == 0) {
            return slen <= threshold ? slen : -1;
        }

        // if lengths are different > k, then can't be within edit distance
        if (abs(slen - tlen) > threshold)
            return -1;

        if (slen > tlen) {
            // swap the two strings to consume less memory
            CharSequence tmp = s;
            s = t;
            t = tmp;
            slen = tlen;
            tlen = (short) t.length();
        }

        initMemoiseTables(threshold, back2, back1, cost, slen);

        for (short j = 1; j <= tlen; j++) {
            cost[0] = j; // j is the cost of inserting this many characters

            // stripe bounds
            int min = max(1, j - threshold);
            int max = min(slen, (short) (j + threshold));

            // at this iteration the left most entry is "too much" so reset it
            if (min > 1) {
                cost[min - 1] = Short.MAX_VALUE;
            }

            iterateOverStripe(s, t, j, cost, back1, back2, min, max);

            // swap our cost arrays to move on to the next "row"
            short[] tempCost = back2;
            back2 = back1;
            back1 = cost;
            cost = tempCost;
        }

        // after exit, the current cost is in back1
        // if back1[slen] > k then we exceeded, so return -1
        if (back1[slen] > threshold) {
            return -1;
        }
        return back1[slen];
    }

    private static void iterateOverStripe(CharSequence s, CharSequence t, short j,
            short[] cost, short[] back1, short[] back2, int min, int max) {

        // iterates over the stripe
        for (int i = min; i <= max; i++) {

            if (s.charAt(i - 1) == t.charAt(j - 1)) {
                cost[i] = back1[i - 1];
            } else {
                cost[i] = (short) (1 + min(cost[i - 1], back1[i], back1[i - 1]));
            }
            if (i >= 2 && j >= 2) {
                // possible transposition to check for
                if ((s.charAt(i - 2) == t.charAt(j - 1)) &&
                        s.charAt(i - 1) == t.charAt(j - 2)) {
                    cost[i] = min(cost[i], (short) (back2[i - 2] + 1));
                }
            }
        }
    }

    private static void initMemoiseTables(short threshold, short[] back2, short[] back1, short[] cost, short slen) {
        // initial "starting" values for inserting all the letters
        short boundary = (short) (min(slen, threshold) + 1);
        for (short i = 0; i < boundary; i++) {
            back1[i] = i;
            back2[i] = i;
        }
        // need to make sure that we don't read a default value when looking "up"
        Arrays.fill(back1, boundary, slen + 1, Short.MAX_VALUE);
        Arrays.fill(back2, boundary, slen + 1, Short.MAX_VALUE);
        Arrays.fill(cost, 0, slen + 1, Short.MAX_VALUE);
    }

    private static short min(short a, short b) {
        return (a <= b ? a : b);
    }

    private static short min(short a, short b, short c) {
        return min(a, min(b, c));
    }
}






?

发表评论
用户名: 匿名