AutoCAD.net-错误消息大全_.NET_编程开发_程序员俱乐部

case Acad::eOk:lstrcpy(Glb_AcadErrorInfo,_T("正确"));break;
case Acad::eNotImplementedYet:lstrcpy(Glb_AcadErrorInfo,_T("尚未实现"));break;
case Acad::eNotApplicable:lstrcpy(Glb_AcadErrorInfo,_T("不合适的"));break;
case Acad::eInvalidInput:lstrcpy(Glb_AcadErrorInfo,_T("无效的输入"));break;
case Acad::eAmbiguousInput:lstrcpy(Glb_AcadErrorInfo,_T("模糊不清的输入"));break;
case Acad::eAmbiguousOutput:lstrcpy(Glb_AcadErrorInfo,_T("模糊不清的输出"));break;
case Acad::eOutOfMemory:lstrcpy(Glb_AcadErrorInfo,_T("内存不足"));break;
case Acad::eBufferTooSmall:lstrcpy(Glb_AcadErrorInfo,_T("缓冲区太小"));break;
case Acad::eInvalidOpenState:lstrcpy(Glb_AcadErrorInfo,_T("无效的打开状态"));break;
case Acad::eEntityInInactiveLayout:lstrcpy(Glb_AcadErrorInfo,_T("实体不在活动布局上"));break;
case Acad::eHandleExists:lstrcpy(Glb_AcadErrorInfo,_T("句柄已存在"));break;
case Acad::eNullHandle:lstrcpy(Glb_AcadErrorInfo,_T("空句柄"));break;
case Acad::eBrokenHandle:lstrcpy(Glb_AcadErrorInfo,_T("损坏的句柄"));break;
case Acad::eUnknownHandle:lstrcpy(Glb_AcadErrorInfo,_T("未知句柄"));break;
case Acad::eHandleInUse:lstrcpy(Glb_AcadErrorInfo,_T("句柄被占用"));break;
case Acad::eNullObjectPointer:lstrcpy(Glb_AcadErrorInfo,_T("对象指针为空"));break;
case Acad::eNullObjectId:lstrcpy(Glb_AcadErrorInfo,_T("对象ID为空"));break;
case Acad::eNullBlockName:lstrcpy(Glb_AcadErrorInfo,_T("块名称为空"));break;
case Acad::eContainerNotEmpty:lstrcpy(Glb_AcadErrorInfo,_T("容器不为空"));break;
case Acad::eNullEntityPointer:lstrcpy(Glb_AcadErrorInfo,_T("实体指针为空"));break;
case Acad::eIllegalEntityType:lstrcpy(Glb_AcadErrorInfo,_T("非法的实体类型"));break;
case Acad::eKeyNotFound:lstrcpy(Glb_AcadErrorInfo,_T("关键字未找到"));break;
case Acad::eDuplicateKey:lstrcpy(Glb_AcadErrorInfo,_T("重复的关键字"));break;
case Acad::eInvalidIndex:lstrcpy(Glb_AcadErrorInfo,_T("无效的索引"));break;
case Acad::eDuplicateIndex:lstrcpy(Glb_AcadErrorInfo,_T("重复的索引"));break;
case Acad::eAlreadyInDb:lstrcpy(Glb_AcadErrorInfo,_T("已经在数据库中了"));break;
case Acad::eOutOfDisk:lstrcpy(Glb_AcadErrorInfo,_T("硬盘容量不足"));break;
case Acad::eDeletedEntry:lstrcpy(Glb_AcadErrorInfo,_T("已经删除的函数入口"));break;
case Acad::eNegativeValueNotAllowed:lstrcpy(Glb_AcadErrorInfo,_T("不允许输入负数"));break;
case Acad::eInvalidExtents:lstrcpy(Glb_AcadErrorInfo,_T("无效的空间范围"));break;
case Acad::eInvalidAdsName:lstrcpy(Glb_AcadErrorInfo,_T("无效的ADS名称"));break;
case Acad::eInvalidSymbolTableName:lstrcpy(Glb_AcadErrorInfo,_T("无效的符号名称"));break;
case Acad::eInvalidKey:lstrcpy(Glb_AcadErrorInfo,_T("无效的关键字"));break;
case Acad::eWrongObjectType:lstrcpy(Glb_AcadErrorInfo,_T("错误的类型"));break;
case Acad::eWrongDatabase:lstrcpy(Glb_AcadErrorInfo,_T("错误的数据库"));break;
case Acad::eObjectToBeDeleted:lstrcpy(Glb_AcadErrorInfo,_T("对象即将被删除"));break;
case Acad::eInvalidDwgVersion:lstrcpy(Glb_AcadErrorInfo,_T("不合理的DWG版本"));break;
case Acad::eAnonymousEntry:lstrcpy(Glb_AcadErrorInfo,_T("多重入口"));break;
case Acad::eIllegalReplacement:lstrcpy(Glb_AcadErrorInfo,_T("非法的替代者"));break;
case Acad::eEndOfObject:lstrcpy(Glb_AcadErrorInfo,_T("对象结束"));break;
case Acad::eEndOfFile:lstrcpy(Glb_AcadErrorInfo,_T("文件结束"));break;
case Acad::eIsReading:lstrcpy(Glb_AcadErrorInfo,_T("正在读取"));break;
case Acad::eIsWriting:lstrcpy(Glb_AcadErrorInfo,_T("正在写入"));break;
case Acad::eNotOpenForRead:lstrcpy(Glb_AcadErrorInfo,_T("不是只读打开"));break;
case Acad::eNotOpenForWrite:lstrcpy(Glb_AcadErrorInfo,_T("不是可写打开"));break;
case Acad::eNotThatKindOfClass:lstrcpy(Glb_AcadErrorInfo,_T("类型不匹配"));break;
case Acad::eInvalidBlockName:lstrcpy(Glb_AcadErrorInfo,_T("不合理的块名称"));break;
case Acad::eMissingDxfField:lstrcpy(Glb_AcadErrorInfo,_T("DXF字段缺失"));break;
case Acad::eDuplicateDxfField:lstrcpy(Glb_AcadErrorInfo,_T("DXF字段重复"));break;
case Acad::eInvalidDxfCode:lstrcpy(Glb_AcadErrorInfo,_T("不合理的DXF编码"));break;

case Acad::eInvalidResBuf:lstrcpy(Glb_AcadErrorInfo,_T("不合理的ResBuf"));break;
case Acad::eBadDxfSequence:lstrcpy(Glb_AcadErrorInfo,_T("不正确的DXF顺序"));break;
case Acad::eFilerError:lstrcpy(Glb_AcadErrorInfo,_T("文件错误"));break;
case Acad::eVertexAfterFace:lstrcpy(Glb_AcadErrorInfo,_T("顶点在面后面"));break;
case Acad::eInvalidFaceVertexIndex:lstrcpy(Glb_AcadErrorInfo,_T("不合理的面顶点顺序"));break;
case Acad::eInvalidMeshVertexIndex:lstrcpy(Glb_AcadErrorInfo,_T("不合理的mesh顺序"));break;
case Acad::eOtherObjectsBusy:lstrcpy(Glb_AcadErrorInfo,_T("其它对象忙"));break;
case Acad::eMustFirstAddBlockToDb:lstrcpy(Glb_AcadErrorInfo,_T("必须先把块加入到数据库"));break;
case Acad::eCannotNestBlockDefs:lstrcpy(Glb_AcadErrorInfo,_T("不可以嵌套块定义"));break;
case Acad::eDwgRecoveredOK:lstrcpy(Glb_AcadErrorInfo,_T("修复DWG完成"));break;
case Acad::eDwgNotRecoverable:lstrcpy(Glb_AcadErrorInfo,_T("无法修复DWG"));break;
case Acad::eDxfPartiallyRead:lstrcpy(Glb_AcadErrorInfo,_T("DXF部分读取"));break;
case Acad::eDxfReadAborted:lstrcpy(Glb_AcadErrorInfo,_T("读取DXF终止"));break;
case Acad::eDxbPartiallyRead:lstrcpy(Glb_AcadErrorInfo,_T("DXB部分读取"));break;
case Acad::eDwgCRCDoesNotMatch:lstrcpy(Glb_AcadErrorInfo,_T("DWG文件的CRC不匹配"));break;
case Acad::eDwgSentinelDoesNotMatch:lstrcpy(Glb_AcadErrorInfo,_T("DWG文件的校验不匹配"));break;
case Acad::eDwgObjectImproperlyRead:lstrcpy(Glb_AcadErrorInfo,_T("DWG文件错误读取"));break;
case Acad::eNoInputFiler:lstrcpy(Glb_AcadErrorInfo,_T("没有找到输入过滤"));break;
case Acad::eDwgNeedsAFullSave:lstrcpy(Glb_AcadErrorInfo,_T("DWG需要完全保存"));break;
case Acad::eDxbReadAborted:lstrcpy(Glb_AcadErrorInfo,_T("DXB读取终止"));break;
case Acad::eFileLockedByACAD:lstrcpy(Glb_AcadErrorInfo,_T("文件被ACAD锁定"));break;
case Acad::eFileAccessErr:lstrcpy(Glb_AcadErrorInfo,_T("无法读取文件"));break;
case Acad::eFileSystemErr:lstrcpy(Glb_AcadErrorInfo,_T("文件系统错误"));break;
case Acad::eFileInternalErr:lstrcpy(Glb_AcadErrorInfo,_T("文件内部错误"));break;
case Acad::eFileTooManyOpen:lstrcpy(Glb_AcadErrorInfo,_T("文件被打开太多次"));break;
case Acad::eFileNotFound:lstrcpy(Glb_AcadErrorInfo,_T("未找到文件"));break;
case Acad::eDwkLockFileFound:lstrcpy(Glb_AcadErrorInfo,_T("找到DWG锁定文件"));break;
case Acad::eWasErased:lstrcpy(Glb_AcadErrorInfo,_T("对象被删除"));break;
case Acad::ePermanentlyErased:lstrcpy(Glb_AcadErrorInfo,_T("对象被永久删除"));break;
case Acad::eWasOpenForRead:lstrcpy(Glb_AcadErrorInfo,_T("对象只读打开"));break;
case Acad::eWasOpenForWrite:lstrcpy(Glb_AcadErrorInfo,_T("对象可写打开"));break;
case Acad::eWasOpenForUndo:lstrcpy(Glb_AcadErrorInfo,_T("对象撤销打开"));break;
case Acad::eWasNotifying:lstrcpy(Glb_AcadErrorInfo,_T("对象被通知"));break;
case Acad::eWasOpenForNotify:lstrcpy(Glb_AcadErrorInfo,_T("对象通知打开"));break;
case Acad::eOnLockedLayer:lstrcpy(Glb_AcadErrorInfo,_T("对象在锁定图层上"));break;
case Acad::eMustOpenThruOwner:lstrcpy(Glb_AcadErrorInfo,_T("必须经过所有者打开"));break;
case Acad::eSubentitiesStillOpen:lstrcpy(Glb_AcadErrorInfo,_T("子对象依然打开着"));break;
case Acad::eAtMaxReaders:lstrcpy(Glb_AcadErrorInfo,_T("超过最大打开次数"));break;
case Acad::eIsWriteProtected:lstrcpy(Glb_AcadErrorInfo,_T("对象被写保护"));break;
case Acad::eIsXRefObject:lstrcpy(Glb_AcadErrorInfo,_T("对象是XRef"));break;
case Acad::eNotAnEntity:lstrcpy(Glb_AcadErrorInfo,_T("对象不是实体"));break;
case Acad::eHadMultipleReaders:lstrcpy(Glb_AcadErrorInfo,_T("被多重打开"));break;
case Acad::eDuplicateRecordName:lstrcpy(Glb_AcadErrorInfo,_T("重复的记录名称"));break;
case Acad::eXRefDependent:lstrcpy(Glb_AcadErrorInfo,_T("依赖于XREF"));break;
case Acad::eSelfReference:lstrcpy(Glb_AcadErrorInfo,_T("引用自身"));break;
case Acad::eMissingSymbolTable:lstrcpy(Glb_AcadErrorInfo,_T("丢失符号化表"));break;
case Acad::eMissingSymbolTableRec:lstrcpy(Glb_AcadErrorInfo,_T("丢失符号化记录"));break;
case Acad::eWasNotOpenForWrite:lstrcpy(Glb_AcadErrorInfo,_T("不是可写打开"));break;
case Acad::eCloseWasNotifying:lstrcpy(Glb_AcadErrorInfo,_T("对象关闭,正在执行通知"));break;
case Acad::eCloseModifyAborted:lstrcpy(Glb_AcadErrorInfo,_T("对象关闭,修改被取消"));break;

case Acad::eClosePartialFailure:lstrcpy(Glb_AcadErrorInfo,_T("对象关闭,部分操作未成功"));break;
case Acad::eCloseFailObjectDamaged:lstrcpy(Glb_AcadErrorInfo,_T("对象被损坏,关闭失败"));break;
case Acad::eCannotBeErasedByCaller:lstrcpy(Glb_AcadErrorInfo,_T("对象不可以被当前呼叫者删除"));break;
case Acad::eCannotBeResurrected:lstrcpy(Glb_AcadErrorInfo,_T("不可以复活"));break;
case Acad::eWasNotErased:lstrcpy(Glb_AcadErrorInfo,_T("对象未删除"));break;
case Acad::eInsertAfter:lstrcpy(Glb_AcadErrorInfo,_T("在后面插入"));break;
case Acad::eFixedAllErrors:lstrcpy(Glb_AcadErrorInfo,_T("修复了所有错误"));break;
case Acad::eLeftErrorsUnfixed:lstrcpy(Glb_AcadErrorInfo,_T("剩下一些错误未修复"));break;
case Acad::eUnrecoverableErrors:lstrcpy(Glb_AcadErrorInfo,_T("不可恢复的错误"));break;
case Acad::eNoDatabase:lstrcpy(Glb_AcadErrorInfo,_T("没有数据库"));break;
case Acad::eXdataSizeExceeded:lstrcpy(Glb_AcadErrorInfo,_T("扩展数据长度太大"));break;
case Acad::eRegappIdNotFound:lstrcpy(Glb_AcadErrorInfo,_T("没有找到扩展数据注册ID"));break;
case Acad::eRepeatEntity:lstrcpy(Glb_AcadErrorInfo,_T("重复实体"));break;
case Acad::eRecordNotInTable:lstrcpy(Glb_AcadErrorInfo,_T("表中未找到记录"));break;
case Acad::eIteratorDone:lstrcpy(Glb_AcadErrorInfo,_T("迭代器完成"));break;
case Acad::eNullIterator:lstrcpy(Glb_AcadErrorInfo,_T("空的迭代器"));break;
case Acad::eNotInBlock:lstrcpy(Glb_AcadErrorInfo,_T("不在块中"));break;
case Acad::eOwnerNotInDatabase:lstrcpy(Glb_AcadErrorInfo,_T("所有者不在数据库中"));break;
case Acad::eOwnerNotOpenForRead:lstrcpy(Glb_AcadErrorInfo,_T("所有者不是只读打开"));break;
case Acad::eOwnerNotOpenForWrite:lstrcpy(Glb_AcadErrorInfo,_T("所有者不是可写打开"));break;
case Acad::eExplodeBeforeTransform:lstrcpy(Glb_AcadErrorInfo,_T("在变换之前就被炸开了"));break;
case Acad::eCannotScaleNonUniformly:lstrcpy(Glb_AcadErrorInfo,_T("不可以不同比例缩放"));break;
case Acad::eNotInDatabase:lstrcpy(Glb_AcadErrorInfo,_T("不在数据库中"));break;
case Acad::eNotCurrentDatabase:lstrcpy(Glb_AcadErrorInfo,_T("不是当前数据库"));break;
case Acad::eIsAnEntity:lstrcpy(Glb_AcadErrorInfo,_T("是一个实体"));break;
case Acad::eCannotChangeActiveViewport:lstrcpy(Glb_AcadErrorInfo,_T("不可以改变活动视口"));break;
case Acad::eNotInPaperspace:lstrcpy(Glb_AcadErrorInfo,_T("不在图纸空间中"));break;
case Acad::eCommandWasInProgress:lstrcpy(Glb_AcadErrorInfo,_T("正在执行命令"));break;
case Acad::eGeneralModelingFailure:lstrcpy(Glb_AcadErrorInfo,_T("创建模型失败"));break;
case Acad::eOutOfRange:lstrcpy(Glb_AcadErrorInfo,_T("超出范围"));break;
case Acad::eNonCoplanarGeometry:lstrcpy(Glb_AcadErrorInfo,_T("没有平面几何对象"));break;
case Acad::eDegenerateGeometry:lstrcpy(Glb_AcadErrorInfo,_T("退化的几何对象"));break;
case Acad::eInvalidAxis:lstrcpy(Glb_AcadErrorInfo,_T("无效的轴线"));break;
case Acad::ePointNotOnEntity:lstrcpy(Glb_AcadErrorInfo,_T("点不在实体上"));break;
case Acad::eSingularPoint:lstrcpy(Glb_AcadErrorInfo,_T("单一的点"));break;
case Acad::eInvalidOffset:lstrcpy(Glb_AcadErrorInfo,_T("无效的偏移"));break;
case Acad::eNonPlanarEntity:lstrcpy(Glb_AcadErrorInfo,_T("没有平面的实体"));break;
case Acad::eCannotExplodeEntity:lstrcpy(Glb_AcadErrorInfo,_T("不可分解的实体"));break;
case Acad::eStringTooLong:lstrcpy(Glb_AcadErrorInfo,_T("字符串太短"));break;
case Acad::eInvalidSymTableFlag:lstrcpy(Glb_AcadErrorInfo,_T("无效的符号化表标志"));break;
case Acad::eUndefinedLineType:lstrcpy(Glb_AcadErrorInfo,_T("没有定义的线型"));break;
case Acad::eInvalidTextStyle:lstrcpy(Glb_AcadErrorInfo,_T("无效的字体样式"));break;
case Acad::eTooFewLineTypeElements:lstrcpy(Glb_AcadErrorInfo,_T("太少的线型要素"));break;
case Acad::eTooManyLineTypeElements:lstrcpy(Glb_AcadErrorInfo,_T("太多的线型要素"));break;
case Acad::eExcessiveItemCount:lstrcpy(Glb_AcadErrorInfo,_T("过多的项目"));break;
case Acad::eIgnoredLinetypeRedef:lstrcpy(Glb_AcadErrorInfo,_T("忽略线型定义描述"));break;
case Acad::eBadUCS:lstrcpy(Glb_AcadErrorInfo,_T("不好的用户坐标系"));break;
case Acad::eBadPaperspaceView:lstrcpy(Glb_AcadErrorInfo,_T("不好的图纸空间视图"));break;
case Acad::eSomeInputDataLeftUnread:lstrcpy(Glb_AcadErrorInfo,_T("一些输入数据未被读取"));break;
case Acad::eNoInternalSpace:lstrcpy(Glb_AcadErrorInfo,_T("不是内部空间"));break;

case Acad::eInvalidDimStyle:lstrcpy(Glb_AcadErrorInfo,_T("无效的标注样式"));break;
case Acad::eInvalidLayer:lstrcpy(Glb_AcadErrorInfo,_T("无效的图层"));break;
case Acad::eUserBreak:lstrcpy(Glb_AcadErrorInfo,_T("用户打断"));break;
case Acad::eDwgNeedsRecovery:lstrcpy(Glb_AcadErrorInfo,_T("DWG文件需要修复"));break;
case Acad::eDeleteEntity:lstrcpy(Glb_AcadErrorInfo,_T("删除实体"));break;
case Acad::eInvalidFix:lstrcpy(Glb_AcadErrorInfo,_T("无效的方位"));break;
case Acad::eFSMError:lstrcpy(Glb_AcadErrorInfo,_T("FSM错误"));break;
case Acad::eBadLayerName:lstrcpy(Glb_AcadErrorInfo,_T("不好的图层名称"));break;
case Acad::eLayerGroupCodeMissing:lstrcpy(Glb_AcadErrorInfo,_T("图层分组编码丢失"));break;
case Acad::eBadColorIndex:lstrcpy(Glb_AcadErrorInfo,_T("不好的颜色索引号"));break;
case Acad::eBadLinetypeName:lstrcpy(Glb_AcadErrorInfo,_T("不好的线型名称"));break;
case Acad::eBadLinetypeScale:lstrcpy(Glb_AcadErrorInfo,_T("不好的线型缩放比例"));break;
case Acad::eBadVisibilityValue:lstrcpy(Glb_AcadErrorInfo,_T("不好的可见性值"));break;
case Acad::eProperClassSeparatorExpected:lstrcpy(Glb_AcadErrorInfo,_T("本身类未找到预期的分割符号(?)"));break;
case Acad::eBadLineWeightValue:lstrcpy(Glb_AcadErrorInfo,_T("不好的线宽值"));break;
case Acad::eBadColor:lstrcpy(Glb_AcadErrorInfo,_T("不好的颜色"));break;
case Acad::ePagerError:lstrcpy(Glb_AcadErrorInfo,_T("页面错误"));break;
case Acad::eOutOfPagerMemory:lstrcpy(Glb_AcadErrorInfo,_T("页面内存不足"));break;
case Acad::ePagerWriteError:lstrcpy(Glb_AcadErrorInfo,_T("页面不可写"));break;
case Acad::eWasNotForwarding:lstrcpy(Glb_AcadErrorInfo,_T("不是促进(?)"));break;
case Acad::eInvalidIdMap:lstrcpy(Glb_AcadErrorInfo,_T("无效的ID字典"));break;
case Acad::eInvalidOwnerObject:lstrcpy(Glb_AcadErrorInfo,_T("无效的所有者"));break;
case Acad::eOwnerNotSet:lstrcpy(Glb_AcadErrorInfo,_T("未设置所有者"));break;
case Acad::eWrongSubentityType:lstrcpy(Glb_AcadErrorInfo,_T("错误的子对象类型"));break;
case Acad::eTooManyVertices:lstrcpy(Glb_AcadErrorInfo,_T("太多节点"));break;
case Acad::eTooFewVertices:lstrcpy(Glb_AcadErrorInfo,_T("太少节点"));break;
case Acad::eNoActiveTransactions:lstrcpy(Glb_AcadErrorInfo,_T("不活动的事务"));break;
case Acad::eNotTopTransaction:lstrcpy(Glb_AcadErrorInfo,_T("不是最顶层的事务"));break;
case Acad::eTransactionOpenWhileCommandEnded:lstrcpy(Glb_AcadErrorInfo,_T("在命令结束的时候打开(/开始)事务"));break;
case Acad::eInProcessOfCommitting:lstrcpy(Glb_AcadErrorInfo,_T("在提交事务的过程中"));break;
case Acad::eNotNewlyCreated:lstrcpy(Glb_AcadErrorInfo,_T("不是新创建的"));break;
case Acad::eLongTransReferenceError:lstrcpy(Glb_AcadErrorInfo,_T("长事务引用错误"));break;
case Acad::eNoWorkSet:lstrcpy(Glb_AcadErrorInfo,_T("没有工作集"));break;
case Acad::eAlreadyInGroup:lstrcpy(Glb_AcadErrorInfo,_T("已经在组中了"));break;
case Acad::eNotInGroup:lstrcpy(Glb_AcadErrorInfo,_T("不在组中"));break;
case Acad::eInvalidREFIID:lstrcpy(Glb_AcadErrorInfo,_T("无效的REFIID"));break;
case Acad::eInvalidNormal:lstrcpy(Glb_AcadErrorInfo,_T("无效的标准"));break;
case Acad::eInvalidStyle:lstrcpy(Glb_AcadErrorInfo,_T("无效的样式"));break;
case Acad::eCannotRestoreFromAcisFile:lstrcpy(Glb_AcadErrorInfo,_T("不可以从Acis(?)文件中恢复"));break;
case Acad::eMakeMeProxy:lstrcpy(Glb_AcadErrorInfo,_T("自我代理"));break;
case Acad::eNLSFileNotAvailable:lstrcpy(Glb_AcadErrorInfo,_T("无效的NLS文件"));break;
case Acad::eNotAllowedForThisProxy:lstrcpy(Glb_AcadErrorInfo,_T("不允许这个代理"));break;
case Acad::eNotSupportedInDwgApi:lstrcpy(Glb_AcadErrorInfo,_T("在Dwg Api中不支持"));break;
case Acad::ePolyWidthLost:lstrcpy(Glb_AcadErrorInfo,_T("多段线宽度丢失"));break;
case Acad::eNullExtents:lstrcpy(Glb_AcadErrorInfo,_T("空的空间范围"));break;
case Acad::eExplodeAgain:lstrcpy(Glb_AcadErrorInfo,_T("再一次分解"));break;
case Acad::eBadDwgHeader:lstrcpy(Glb_AcadErrorInfo,_T("坏的DWG文件头"));break;
case Acad::eLockViolation:lstrcpy(Glb_AcadErrorInfo,_T("锁定妨碍当前操作"));break;
case Acad::eLockConflict:lstrcpy(Glb_AcadErrorInfo,_T("锁定冲突"));break;
case Acad::eDatabaseObjectsOpen:lstrcpy(Glb_AcadErrorInfo,_T("数据库对象打开"));break;

case Acad::eLockChangeInProgress:lstrcpy(Glb_AcadErrorInfo,_T("锁定改变中"));break;
case Acad::eVetoed:lstrcpy(Glb_AcadErrorInfo,_T("禁止"));break;
case Acad::eNoDocument:lstrcpy(Glb_AcadErrorInfo,_T("没有文档"));break;
case Acad::eNotFromThisDocument:lstrcpy(Glb_AcadErrorInfo,_T("不是从这个文档"));break;
case Acad::eLISPActive:lstrcpy(Glb_AcadErrorInfo,_T("LISP活动"));break;
case Acad::eTargetDocNotQuiescent:lstrcpy(Glb_AcadErrorInfo,_T("目标文档活动中"));break;
case Acad::eDocumentSwitchDisabled:lstrcpy(Glb_AcadErrorInfo,_T("禁止文档转换"));break;
case Acad::eInvalidContext:lstrcpy(Glb_AcadErrorInfo,_T("无效的上下文环境"));break;
case Acad::eCreateFailed:lstrcpy(Glb_AcadErrorInfo,_T("创建失败"));break;
case Acad::eCreateInvalidName:lstrcpy(Glb_AcadErrorInfo,_T("创建无效名称"));break;
case Acad::eSetFailed:lstrcpy(Glb_AcadErrorInfo,_T("设置失败"));break;
case Acad::eDelDoesNotExist:lstrcpy(Glb_AcadErrorInfo,_T("删除对象不存在"));break;
case Acad::eDelIsModelSpace:lstrcpy(Glb_AcadErrorInfo,_T("删除模型空间"));break;
case Acad::eDelLastLayout:lstrcpy(Glb_AcadErrorInfo,_T("删除最后一个布局"));break;
case Acad::eDelUnableToSetCurrent:lstrcpy(Glb_AcadErrorInfo,_T("删除后无法设置当前对象"));break;
case Acad::eDelUnableToFind:lstrcpy(Glb_AcadErrorInfo,_T("没有找到删除对象"));break;
case Acad::eRenameDoesNotExist:lstrcpy(Glb_AcadErrorInfo,_T("重命名对象不存在"));break;
case Acad::eRenameIsModelSpace:lstrcpy(Glb_AcadErrorInfo,_T("不可以重命令模型空间"));break;
case Acad::eRenameInvalidLayoutName:lstrcpy(Glb_AcadErrorInfo,_T("重命名无效的布局名称"));break;
case Acad::eRenameLayoutAlreadyExists:lstrcpy(Glb_AcadErrorInfo,_T("重命名布局名称已存在"));break;
case Acad::eRenameInvalidName:lstrcpy(Glb_AcadErrorInfo,_T("重命名无效名称"));break;
case Acad::eCopyDoesNotExist:lstrcpy(Glb_AcadErrorInfo,_T("拷贝不存在"));break;
case Acad::eCopyIsModelSpace:lstrcpy(Glb_AcadErrorInfo,_T("拷贝是模型空间"));break;
case Acad::eCopyFailed:lstrcpy(Glb_AcadErrorInfo,_T("拷贝失败"));break;
case Acad::eCopyInvalidName:lstrcpy(Glb_AcadErrorInfo,_T("拷贝无效名称"));break;
case Acad::eCopyNameExists:lstrcpy(Glb_AcadErrorInfo,_T("拷贝名称存在"));break;
case Acad::eProfileDoesNotExist:lstrcpy(Glb_AcadErrorInfo,_T("配置名称不存在"));break;
case Acad::eInvalidFileExtension:lstrcpy(Glb_AcadErrorInfo,_T("无效的文件后缀名成"));break;
case Acad::eInvalidProfileName:lstrcpy(Glb_AcadErrorInfo,_T("无效的配置文件名称"));break;
case Acad::eFileExists:lstrcpy(Glb_AcadErrorInfo,_T("文件存在"));break;
case Acad::eProfileIsInUse:lstrcpy(Glb_AcadErrorInfo,_T("配置文件存在"));break;
case Acad::eCantOpenFile:lstrcpy(Glb_AcadErrorInfo,_T("打开文件失败"));break;
case Acad::eNoFileName:lstrcpy(Glb_AcadErrorInfo,_T("没有文件名称"));break;
case Acad::eRegistryAccessError:lstrcpy(Glb_AcadErrorInfo,_T("读取注册表错误"));break;
case Acad::eRegistryCreateError:lstrcpy(Glb_AcadErrorInfo,_T("创建注册表项错误"));break;
case Acad::eBadDxfFile:lstrcpy(Glb_AcadErrorInfo,_T("坏的DXF文件"));break;
case Acad::eUnknownDxfFileFormat:lstrcpy(Glb_AcadErrorInfo,_T("未知的DXF文件格式"));break;
case Acad::eMissingDxfSection:lstrcpy(Glb_AcadErrorInfo,_T("丢失DXF分段"));break;
case Acad::eInvalidDxfSectionName:lstrcpy(Glb_AcadErrorInfo,_T("无效的DXF分段名称"));break;
case Acad::eNotDxfHeaderGroupCode:lstrcpy(Glb_AcadErrorInfo,_T("无效的DXF组码"));break;
case Acad::eUndefinedDxfGroupCode:lstrcpy(Glb_AcadErrorInfo,_T("没有定义DXF组码"));break;
case Acad::eNotInitializedYet:lstrcpy(Glb_AcadErrorInfo,_T("没有初始化"));break;
case Acad::eInvalidDxf2dPoint:lstrcpy(Glb_AcadErrorInfo,_T("无效的DXF二维点"));break;
case Acad::eInvalidDxf3dPoint:lstrcpy(Glb_AcadErrorInfo,_T("无效的DXD三维点"));break;
case Acad::eBadlyNestedAppData:lstrcpy(Glb_AcadErrorInfo,_T("坏的嵌套应用程序数据"));break;
case Acad::eIncompleteBlockDefinition:lstrcpy(Glb_AcadErrorInfo,_T("不完整的块定义"));break;
case Acad::eIncompleteComplexObject:lstrcpy(Glb_AcadErrorInfo,_T("不完整的合成(?复杂)对象"));break;
case Acad::eBlockDefInEntitySection:lstrcpy(Glb_AcadErrorInfo,_T("块定义在实体段中"));break;
case Acad::eNoBlockBegin:lstrcpy(Glb_AcadErrorInfo,_T("没有块开始"));break;
case Acad::eDuplicateLayerName:lstrcpy(Glb_AcadErrorInfo,_T("重复的图层名称"));break;

case Acad::eBadPlotStyleName:lstrcpy(Glb_AcadErrorInfo,_T("不好的打印样式名称"));break;
case Acad::eDuplicateBlockName:lstrcpy(Glb_AcadErrorInfo,_T("重复的块名称"));break;
case Acad::eBadPlotStyleType:lstrcpy(Glb_AcadErrorInfo,_T("不好的打印样式类型"));break;
case Acad::eBadPlotStyleNameHandle:lstrcpy(Glb_AcadErrorInfo,_T("不好的打印样式名称句柄"));break;
case Acad::eUndefineShapeName:lstrcpy(Glb_AcadErrorInfo,_T("没有定义形状名称"));break;
case Acad::eDuplicateBlockDefinition:lstrcpy(Glb_AcadErrorInfo,_T("重复的块定义"));break;
case Acad::eMissingBlockName:lstrcpy(Glb_AcadErrorInfo,_T("丢失了块名称"));break;
case Acad::eBinaryDataSizeExceeded:lstrcpy(Glb_AcadErrorInfo,_T("二进制数据长度太长"));break;
case Acad::eObjectIsReferenced:lstrcpy(Glb_AcadErrorInfo,_T("对象被引用"));break;
case Acad::eNoThumbnailBitmap:lstrcpy(Glb_AcadErrorInfo,_T("没有缩略图"));break;
case Acad::eGuidNoAddress:lstrcpy(Glb_AcadErrorInfo,_T("未找到GUID地址"));break;
case Acad::eMustBe0to2:lstrcpy(Glb_AcadErrorInfo,_T("必须是0到2"));break;
case Acad::eMustBe0to3:lstrcpy(Glb_AcadErrorInfo,_T("必须是0到3"));break;
case Acad::eMustBe0to4:lstrcpy(Glb_AcadErrorInfo,_T("必须是0到4"));break;
case Acad::eMustBe0to5:lstrcpy(Glb_AcadErrorInfo,_T("必须是0到5"));break;
case Acad::eMustBe0to8:lstrcpy(Glb_AcadErrorInfo,_T("必须是0到8"));break;
case Acad::eMustBe1to8:lstrcpy(Glb_AcadErrorInfo,_T("必须是1到8"));break;
case Acad::eMustBe1to15:lstrcpy(Glb_AcadErrorInfo,_T("必须是1到15"));break;
case Acad::eMustBePositive:lstrcpy(Glb_AcadErrorInfo,_T("必须为正数"));break;
case Acad::eMustBeNonNegative:lstrcpy(Glb_AcadErrorInfo,_T("必须为非负数"));break;
case Acad::eMustBeNonZero:lstrcpy(Glb_AcadErrorInfo,_T("不可以等于0"));break;
case Acad::eMustBe1to6:lstrcpy(Glb_AcadErrorInfo,_T("必须是1到6"));break;
case Acad::eNoPlotStyleTranslationTable:lstrcpy(Glb_AcadErrorInfo,_T("没有打印样式事务表(?)"));break;
case Acad::ePlotStyleInColorDependentMode:lstrcpy(Glb_AcadErrorInfo,_T("打印样式依赖颜色"));break;
case Acad::eMaxLayouts:lstrcpy(Glb_AcadErrorInfo,_T("最大布局数量"));break;
case Acad::eNoClassId:lstrcpy(Glb_AcadErrorInfo,_T("没有类ID"));break;
case Acad::eUndoOperationNotAvailable:lstrcpy(Glb_AcadErrorInfo,_T("撤销操作无效"));break;
case Acad::eUndoNoGroupBegin:lstrcpy(Glb_AcadErrorInfo,_T("撤销操作没有组开始"));break;
case Acad::eHatchTooDense:lstrcpy(Glb_AcadErrorInfo,_T("填充太密集"));break;
case Acad::eOpenFileCancelled:lstrcpy(Glb_AcadErrorInfo,_T("打开文件取消"));break;
case Acad::eNotHandled:lstrcpy(Glb_AcadErrorInfo,_T("没有处理"));break;
case Acad::eMakeMeProxyAndResurrect:lstrcpy(Glb_AcadErrorInfo,_T("将自己变成代理然后复活"));break;
case Acad::eFileMissingSections:lstrcpy(Glb_AcadErrorInfo,_T("文件丢失分段"));break;
case Acad::eRepeatedDwgRead:lstrcpy(Glb_AcadErrorInfo,_T("重复的读取DWG文件"));break;
case Acad::eWrongCellType:lstrcpy(Glb_AcadErrorInfo,_T("错误的单元格类型"));break;
case Acad::eCannotChangeColumnType:lstrcpy(Glb_AcadErrorInfo,_T("不可以改变列类型"));break;
case Acad::eRowsMustMatchColumns:lstrcpy(Glb_AcadErrorInfo,_T("行必须匹配列"));break;
case Acad::eFileSharingViolation:lstrcpy(Glb_AcadErrorInfo,_T("文件共享妨碍"));break;
case Acad::eUnsupportedFileFormat:lstrcpy(Glb_AcadErrorInfo,_T("不支持的文件格式"));break;
case Acad::eObsoleteFileFormat:lstrcpy(Glb_AcadErrorInfo,_T("废弃的文件格式"));break;
case Acad::eDwgShareDemandLoad:lstrcpy(Glb_AcadErrorInfo,_T("DWG共享要求加载(?)"));break;
case Acad::eDwgShareReadAccess:lstrcpy(Glb_AcadErrorInfo,_T("DWG共享读取"));break;
case Acad::eDwgShareWriteAccess:lstrcpy(Glb_AcadErrorInfo,_T("DWG共享写入"));break;
case Acad::eLoadFailed:lstrcpy(Glb_AcadErrorInfo,_T("加载失败"));break;
case Acad::eDeviceNotFound:lstrcpy(Glb_AcadErrorInfo,_T("驱动未找到"));break;
case Acad::eNoCurrentConfig:lstrcpy(Glb_AcadErrorInfo,_T("没有当前配置"));break;
case Acad::eNullPtr:lstrcpy(Glb_AcadErrorInfo,_T("空指针"));break;
case Acad::eNoLayout:lstrcpy(Glb_AcadErrorInfo,_T("没有布局"));break;
case Acad::eIncompatiblePlotSettings:lstrcpy(Glb_AcadErrorInfo,_T("不兼容的打印设置"));break;
case Acad::eNonePlotDevice:lstrcpy(Glb_AcadErrorInfo,_T("没有打印驱动"));break;

case Acad::eNoMatchingMedia:lstrcpy(Glb_AcadErrorInfo,_T("没有匹配的打印尺寸"));break;
case Acad::eInvalidView:lstrcpy(Glb_AcadErrorInfo,_T("无效的视图"));break;
case Acad::eInvalidWindowArea:lstrcpy(Glb_AcadErrorInfo,_T("无效的窗口范围"));break;
case Acad::eInvalidPlotArea:lstrcpy(Glb_AcadErrorInfo,_T("无效的打印范围"));break;
case Acad::eCustomSizeNotPossible:lstrcpy(Glb_AcadErrorInfo,_T("用户输入的打印尺寸不可能存在"));break;
case Acad::ePageCancelled:lstrcpy(Glb_AcadErrorInfo,_T("纸张取消"));break;
case Acad::ePlotCancelled:lstrcpy(Glb_AcadErrorInfo,_T("打印取消"));break;
case Acad::eInvalidEngineState:lstrcpy(Glb_AcadErrorInfo,_T("无效的引擎状态"));break;
case Acad::ePlotAlreadyStarted:lstrcpy(Glb_AcadErrorInfo,_T("已经开始在打印了"));break;
case Acad::eNoErrorHandler:lstrcpy(Glb_AcadErrorInfo,_T("没有错误处理"));break;
case Acad::eInvalidPlotInfo:lstrcpy(Glb_AcadErrorInfo,_T("无效的打印信息"));break;
case Acad::eNumberOfCopiesNotSupported:lstrcpy(Glb_AcadErrorInfo,_T("不支持打印份数"));break;
case Acad::eLayoutNotCurrent:lstrcpy(Glb_AcadErrorInfo,_T("不是当前布局"));break;
case Acad::eGraphicsNotGenerated:lstrcpy(Glb_AcadErrorInfo,_T("绘图对象创建失败(?)"));break;
case Acad::eCannotPlotToFile:lstrcpy(Glb_AcadErrorInfo,_T("不可以打印到文件"));break;
case Acad::eMustPlotToFile:lstrcpy(Glb_AcadErrorInfo,_T("必须打印到文件"));break;
case Acad::eNotMultiPageCapable:lstrcpy(Glb_AcadErrorInfo,_T("不支持多种纸张"));break;
case Acad::eBackgroundPlotInProgress:lstrcpy(Glb_AcadErrorInfo,_T("正在后台打印"));break;
case Acad::eSubSelectionSetEmpty:lstrcpy(Glb_AcadErrorInfo,_T("子选择集被设置为空"));break;
case Acad::eInvalidObjectId:lstrcpy(Glb_AcadErrorInfo,_T("无效的对象ID或者对象ID不在当前数据库"));break;
case Acad::eInvalidXrefObjectId:lstrcpy(Glb_AcadErrorInfo,_T("无效的XREF对象ID或者XREF对象ID不在当前数据库"));break;
case Acad::eNoViewAssociation:lstrcpy(Glb_AcadErrorInfo,_T("未找到对应的视图对象"));break;
case Acad::eNoLabelBlock:lstrcpy(Glb_AcadErrorInfo,_T("视口未找到关联的块"));break;
case Acad::eUnableToSetViewAssociation:lstrcpy(Glb_AcadErrorInfo,_T("设置视图关联视口失败"));break;
case Acad::eUnableToGetViewAssociation:lstrcpy(Glb_AcadErrorInfo,_T("无法找到关联的视图"));break;
case Acad::eUnableToSetLabelBlock:lstrcpy(Glb_AcadErrorInfo,_T("无法设置关联的块"));break;
case Acad::eUnableToGetLabelBlock:lstrcpy(Glb_AcadErrorInfo,_T("无法获取关联的块"));break;
case Acad::eUnableToRemoveAssociation:lstrcpy(Glb_AcadErrorInfo,_T("无法移除视口关联对象"));break;
case Acad::eUnableToSyncModelView:lstrcpy(Glb_AcadErrorInfo,_T("无法同步视口和模型空间视图"));break;
case Acad::eSecInitializationFailure:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)初始化错误"));break;
case Acad::eSecErrorReadingFile:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)读取文件错误"));break;
case Acad::eSecErrorWritingFile:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)写入文件错误"));break;
case Acad::eSecInvalidDigitalID:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)无效的数字ID"));break;
case Acad::eSecErrorGeneratingTimestamp:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)创建时间戳错误"));break;
case Acad::eSecErrorComputingSignature:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)电子签名错误"));break;
case Acad::eSecErrorWritingSignature:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)写入签名错误"));break;
case Acad::eSecErrorEncryptingData:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)加密数据错误"));break;
case Acad::eSecErrorCipherNotSupported:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)不支持的密码"));break;
case Acad::eSecErrorDecryptingData:lstrcpy(Glb_AcadErrorInfo,_T("SEC(?)解密数据错误"));break;
//case Acad::eInetBase:lstrcpy(Glb_AcadErrorInfo,_T("网络错误"));break;
case Acad::eInetOk:lstrcpy(Glb_AcadErrorInfo,_T("网络正常"));break;
case Acad::eInetInCache:lstrcpy(Glb_AcadErrorInfo,_T("在缓冲区中"));break;
case Acad::eInetFileNotFound:lstrcpy(Glb_AcadErrorInfo,_T("网络文件不存在"));break;
case Acad::eInetBadPath:lstrcpy(Glb_AcadErrorInfo,_T("不好的网络路径"));break;
case Acad::eInetTooManyOpenFiles:lstrcpy(Glb_AcadErrorInfo,_T("打开太多网络文件"));break;
case Acad::eInetFileAccessDenied:lstrcpy(Glb_AcadErrorInfo,_T("打开网络文件被拒绝"));break;
case Acad::eInetInvalidFileHandle:lstrcpy(Glb_AcadErrorInfo,_T("无效的网络文件句柄"));break;
case Acad::eInetDirectoryFull:lstrcpy(Glb_AcadErrorInfo,_T("网络文件夹目录已满"));break;
case Acad::eInetHardwareError:lstrcpy(Glb_AcadErrorInfo,_T("网络硬件错误"));break;
case Acad::eInetSharingViolation:lstrcpy(Glb_AcadErrorInfo,_T("违反网络共享"));break;

case Acad::eInetDiskFull:lstrcpy(Glb_AcadErrorInfo,_T("网络硬盘满了"));break;
case Acad::eInetFileGenericError:lstrcpy(Glb_AcadErrorInfo,_T("网络文件创建错误"));break;
case Acad::eInetValidURL:lstrcpy(Glb_AcadErrorInfo,_T("无效的URL地址"));break;
case Acad::eInetNotAnURL:lstrcpy(Glb_AcadErrorInfo,_T("不是URL地址"));break;
case Acad::eInetNoWinInet:lstrcpy(Glb_AcadErrorInfo,_T("没有WinInet(?)"));break;
case Acad::eInetOldWinInet:lstrcpy(Glb_AcadErrorInfo,_T("旧的WinInet(?)"));break;
case Acad::eInetNoAcadInet:lstrcpy(Glb_AcadErrorInfo,_T("无法连接ACAD网站"));break;
case Acad::eInetNotImplemented:lstrcpy(Glb_AcadErrorInfo,_T("无法应用网络"));break;
case Acad::eInetProtocolNotSupported:lstrcpy(Glb_AcadErrorInfo,_T("网络协议不支持"));break;
case Acad::eInetCreateInternetSessionFailed:lstrcpy(Glb_AcadErrorInfo,_T("创建网络会话失败"));break;
case Acad::eInetInternetSessionConnectFailed:lstrcpy(Glb_AcadErrorInfo,_T("连接网络会话失败"));break;
case Acad::eInetInternetSessionOpenFailed:lstrcpy(Glb_AcadErrorInfo,_T("打开网络会话失败"));break;
case Acad::eInetInvalidAccessType:lstrcpy(Glb_AcadErrorInfo,_T("无效的网络接收类型"));break;
case Acad::eInetFileOpenFailed:lstrcpy(Glb_AcadErrorInfo,_T("打开网络文件失败"));break;
case Acad::eInetHttpOpenRequestFailed:lstrcpy(Glb_AcadErrorInfo,_T("打开HTTP协议失败"));break;
case Acad::eInetUserCancelledTransfer:lstrcpy(Glb_AcadErrorInfo,_T("用户取消了网络传输"));break;
case Acad::eInetHttpBadRequest:lstrcpy(Glb_AcadErrorInfo,_T("不合理的网络请求"));break;
case Acad::eInetHttpAccessDenied:lstrcpy(Glb_AcadErrorInfo,_T("HTTP协议拒绝"));break;
case Acad::eInetHttpPaymentRequired:lstrcpy(Glb_AcadErrorInfo,_T("HTTP协议要求付费"));break;
case Acad::eInetHttpRequestForbidden:lstrcpy(Glb_AcadErrorInfo,_T("禁止HTTP请求"));break;
case Acad::eInetHttpObjectNotFound:lstrcpy(Glb_AcadErrorInfo,_T("HTTP对象未找到"));break;
case Acad::eInetHttpBadMethod:lstrcpy(Glb_AcadErrorInfo,_T("不合理的HTTP请求方法"));break;
case Acad::eInetHttpNoAcceptableResponse:lstrcpy(Glb_AcadErrorInfo,_T("不接受的HTTP回复"));break;
case Acad::eInetHttpProxyAuthorizationRequired:lstrcpy(Glb_AcadErrorInfo,_T("要求HTTP代理授权"));break;
case Acad::eInetHttpTimedOut:lstrcpy(Glb_AcadErrorInfo,_T("HTTP超时"));break;
case Acad::eInetHttpConflict:lstrcpy(Glb_AcadErrorInfo,_T("HTTP冲突"));break;
case Acad::eInetHttpResourceGone:lstrcpy(Glb_AcadErrorInfo,_T("网络资源被用光"));break;
case Acad::eInetHttpLengthRequired:lstrcpy(Glb_AcadErrorInfo,_T("HTTP请求长度是必须的"));break;
case Acad::eInetHttpPreconditionFailure:lstrcpy(Glb_AcadErrorInfo,_T("HTTP预处理失败"));break;
case Acad::eInetHttpRequestTooLarge:lstrcpy(Glb_AcadErrorInfo,_T("HTTP请求太大"));break;
case Acad::eInetHttpUriTooLong:lstrcpy(Glb_AcadErrorInfo,_T("URL地址太长"));break;
case Acad::eInetHttpUnsupportedMedia:lstrcpy(Glb_AcadErrorInfo,_T("HTTP不支持的媒体"));break;
case Acad::eInetHttpServerError:lstrcpy(Glb_AcadErrorInfo,_T("HTTP服务器错误"));break;
case Acad::eInetHttpNotSupported:lstrcpy(Glb_AcadErrorInfo,_T("HTTP不支持"));break;
case Acad::eInetHttpBadGateway:lstrcpy(Glb_AcadErrorInfo,_T("HTTP网关错误"));break;
case Acad::eInetHttpServiceUnavailable:lstrcpy(Glb_AcadErrorInfo,_T("HTTP服务当前不可用"));break;
case Acad::eInetHttpGatewayTimeout:lstrcpy(Glb_AcadErrorInfo,_T("HTTP网关超时"));break;
case Acad::eInetHttpVersionNotSupported:lstrcpy(Glb_AcadErrorInfo,_T("HTTP版本不支持"));break;
case Acad::eInetInternetError:lstrcpy(Glb_AcadErrorInfo,_T("HTTP网络错误"));break;
case Acad::eInetGenericException:lstrcpy(Glb_AcadErrorInfo,_T("HTTP常规异常"));break;
case Acad::eInetUnknownError:lstrcpy(Glb_AcadErrorInfo,_T("HTTP未知错误"));break;
case Acad::eAlreadyActive:lstrcpy(Glb_AcadErrorInfo,_T("已经是活动的了"));break;
case Acad::eAlreadyInactive:lstrcpy(Glb_AcadErrorInfo,_T("已经是不活动的了"));break;

源作者:boitboy,网站:http://www.cadgj.com